Czech Dental Care Clinic

The tooth crown as missed teeth recovery

Welcome to the Czech Dental Care Clinic!

A tooth crown is a cap-like tooth restoration used to cover a damaged tooth. The tooth crown can give support to misshapen or badly broken teeth and permanently replace missing teeth to complete a smile or improve a bite pattern.

The tooth crown may be molded from metal, ceramic, plastics, or combinations of all three. They are cemented in place and coated to make them more natural looking.

Historically, a variety of materials have been used as tooth replacements. The ancient Egyptians used animal teeth and pieces of bone as primitive replacement materials. More recently, artificial teeth have been fabricated from substances such as ivory, porcelain, and even platinum.

With modern technology, high quality tooth replacements can be made from synthetic plastic resins, ceramic composites, and lightweight metal alloys.

Depending on application different types of plasters are used: impression plaster is used to record the shape of the teeth, model plaster is used to make durable models of the oral cavity, and investment plaster is used to make molds for shaping metal, ceramics and plastics. Waxes are also sometimes used in this regard.

Metals are frequently used in tooth crown construction because they have good hardness, strength, stiffness, durability, corrosion resistance, and bio-compatibility. Metals formulated as mixtures of mercury have been historically used. In fact, one source notes that metal amalgam was used as a dental restorative as early as 1528.

Ceramic is most often used as a coating for metal-structured tooth crown. The two primary types of ceramics used in tooth crown: made from potassium feldspar and glass-ceramic.

Special dental adhesives, or dental cements, are used to hold the tooth crown in place. Dental adhesives can be classified as either aqueous or nonaqueous. The aqueous type include zinc phosphates, polycarboxylate cements, glassionomer cements, and calcium phosphate cements. The nonaqueous type include zinc oxide-eugenol, calcium chelates, and acrylic resins such as polymethyl methyacrylate.

Coatings are used to make the tooth crown appear more natural. Porcelain is used in this regard, but it is difficult to work with and hard to match to the tooth's natural color. Resins similar to the ones used in tooth construction are also used to create tooth-colored veneers on crowns. These resins have an advantage over other veneers in that they are inexpensive, easy to fabricate, and can be matched to the color of tooth structure. However, acrylic coatings may not adhere to the crown's surface as well as porcelain or other materials.

The prosethedontist may design the crown's surface with mechanical undercuts to give the coating a better grip. Resin coatings have relatively low mechanical strength and color stability and poor abrasion and stain resistance as compared to porcelain.

The crown may require a finishing coat to seal it and improve its natural appearance. Such coatings are typically acrylic polymers. The polymer can be painted on as a thin film, which hardens to a durable finish. Some polymers require a dose of ultraviolet light to properly cure.

Good quality control is critical to ensure the tooth crown fits and looks natural in the patient's mouth. Every crown is unique because every person's mouth is different and every crown is custom molded to fit.

If existed tooth crown failure due to biological factors there are special crown and bridge removal systems that have been developed for easy removal of these prosthedontics. This is accomplished by placing a precision vertical channel in the surface of the crown, then threading the surface until the cement layer has been broken. The crown after can then easily be lifted from the underlying tooth without force.

Another advance in tooth crown technology involves pre-made and pre-sized stainless steel crowns, which are designed as generic tooth replacements. Usage of this new type of crown is very simple: first the tooth surface is prepared then the selected crown is cemented in place with a standard stainless steel crown adhesive. The crown can be crimped or cut to fit and the epoxy finish will not chip or peel. While this new technology offers increased simplicity, it does not give the same appearance as a custom made crown.

Future advancements for tooth crown are likely to come from new resins, which have improved adhesion in the high moisture environment of the oral cavity.

 

Tooth crown cost

The tooth crown price displayed are an approximate guide only. Please remember that each person is different and therefore each treatment is slightly differs.

Our prices for the tooth crown at Czech Dental Care Clinic:

Tooth crown consultation	41 EUR
Ortopantomogram for tooth crown	58 EUR
One tooth removing	124 EUR
One root canal clearing	22 EUR
One canal filling	20 EUR
Local anaesthesia, 1 application	13 EUR
One crown, full ceramic	343 EUR
One temporary crown	54 EUR
One artificial tooth	208 EUR

 

Feel free to contact us should you have any questions that were not answered within this page about tooth crown.

Use form on our contact us page you may book exactly the day and the time of your consultation with doctor our Czech Dental Care Clinic about tooth crown or any other procedure.

If you consider to visit in Prague, you may stay in hotel part of our Czech Dental Care Clinic with room like hotel 4* all time your Prague`s visit.